Xerox ApeosPort-II 3000, User Manual

Page: 540 / 619

16 Appendix
538
Appe
nd
ix
16
Specifications
This section lists the main specifications of the machine. Note that the specifications
and the appearance of the product may change without prior notice.
„ Copy Feature Specifications
Type Console
Memory Standard RAM: 128 MB (Copier model, shared memory)
256 MB (Copier/printer model, shared memory)
512 MB (ApeosPort copier/printer model,
shared memory)
Expandable using optional 256 MB memory
(DocuCentre only). Only one optional memory
can be added.
Scan resolution 600 x 600 dpi
Output resolution 600 x 600 dpi
Gradation 256 levels
Warm-up time 30 seconds or less (at 20
°
C room temperature)
Important • The value may vary depending on the machine
configuration.
Copy document The maximum size is 297 x 432 mm (A3, 11 x 17") for both sheets
and books.
Copy (sheet) size [Trays 1 - 4]
Maximum: A3 (297 x 420 mm), Tabloid (11 x 17")
Minimum : A5 (148 x 210 mm)
[Bypass tray]
Maximum: A3 (297 x 420mm), Tabloid (11 x 17")
Minimum : Postcard (100 x 148 mm), Envelope (120 x 235
mm)
Non-standard size:X direction 99 to 432 mm, Y direction 89 to
297 mm
(When copying both sides of non-standard size paper, specify
the size within the range from 127 to 432 mm for the X direction
and from 89 to 297 mm for the Y direction.
Image loss width:Top edge, 4 mm or less; bottom edge, 4 mm
or less; left and right edges, 4 mm or less
Important • If the X (width) of non-standard size paper is less than 140
mm, documents may not be printed properly.
Copy paper Paper Tray 1 : 60 - 105g/m
2
Paper Trays 2 to 4 : 60 - 216g/m
2
Paper Tray 5 (Bypass):60 - 216g/m
2
Important • The use of paper recommended by Fuji Xerox is suggested.
Copying may not be performed correctly depending on the
conditions.
First copy output time
Important
•
The values may vary
depending on the
machine configuration.
3.2 seconds (A4 )