Xerox ApeosPort-II 3000, User Manual

Page: 419 / 619

Replacing Consumables
417
M
a
in
te
na
nc
e
14
2
Pull out the hole punch container
towards you.
3
Discard all the scraps.
4
Insert the empty hole punch
container into its original position
until it comes to a stop.
5
Close the front cover of the finisher.
Note • If you do not completely close the front cover, the machine will display a message and not
resume operation.
Replacing the Stamp Cartridge
If your machine offers the Fax service and is installed with optional Stamp Kit, replace
the stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.
• Problems caused by using consumables other than what is recommended by us are not
covered by the maintenance service contract.
• Before using consumables, carefully read the instructions and precautions on the
packaging.
Note • We recommend having spare consumables ready.
1
Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.