Xerox ApeosPort-II 3000, User Manual, Page: 357 / 619

Printing and Deleting Stored Documents
355
Job S
ta
tu
s
11
Charge Print
When you set to use the Charge Print feature under [Charge/Private Print Settings] >
[Receive Control], received print jobs are saved for each Billing ID. Any jobs that were
not given a Billing ID on the print driver are saved in [No User ID].
For more information, refer to Charge / Private Print Settings (P.343).
The following describes how to print and delete a document saved in Charge Print.
1
When printing the stored jobs, the
authentication is required. Press
the <Log In/Out> button. Enter the
target user ID using the numeric
keypad or the keyboard displayed
by pressing [Keyboard], and select
[Confirm].
2
Select [Charge Print].
3
Select the user to be checked, and
select [Document List].
Note • Select [Refresh] to display the
updated information.
• Select [ ] to return to the
previous screen or [ ] to move to the next screen.
• Entering a 3-digit user ID with the numeric keypad specifies the user directly.
4
Enter the passcode, and select
[Confirm].
Note • If no passcode is assigned,
the passcode entry screen will
not appear.
5
Select the document to be printed
or deleted.
6
Select any item.
„ Delete
Deletes the document stored with Charge Print.
Refer to When [Delete] is Selected (P.355).
„ Print
Prints the document stored with Charge Print.
Refer to When [Print] is Selected (P.356).
When [Delete] is Selected
1
Select [Yes].