Paper and Media
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 177
User Guide
Loading Paper
This section includes:
•
Loading Paper in Trays 1–4 ....................................................................................................................................... 177
•
Adjusting the Paper Guides in the 520-Sheet Adjustable Trays .................................................................. 180
•
Loading Paper in Trays 3 and 4 of the Tandem Tray ...................................................................................... 181
•
Loading Paper in Tray 5 .............................................................................................................................................. 183
•
Loading Paper in Tray 6 .............................................................................................................................................. 185
Loading Paper in Trays 1–4
The system administrator can set Trays 1–4 to Fully Adjustable or Dedicated mode. Each time a tray is
opened and closed, the paper settings appear on the control panel:
•
The Fully Adjustable mode allows you to confirm or change the media settings. The tray guides
automatically detect the size of paper loaded.
•
The Dedicated mode displays the media settings for the tray. A warning message appears on the
control panel when the wrong media is loaded, or the tray guides are set incorrectly.
Note:
Only the system administrator can change the media settings for a Dedicated tray.
A warning message appears on the control panel when the paper in the tray is in short supply, or when a
tray is empty.
To load Trays 3 and 4 of the Tandem Tray Module, refer to
Loading Paper in Trays 3 and 4 of the
Tandem Tray
on page 181.
1. Pull out the tray until it stops.
2. Ensure that the paper-guide locks are set in the correct position for the standard or custom size
paper that you are loading. For details, refer to
Adjusting the Paper Guides in the 520-Sheet
Adjustable Trays
on page 180.
