manualshive.com logo in svg

Xerox 7400DN - Phaser Color LED Printer, User Manual

Share
Download
Xerox 7400DN - Phaser Color LED Printer User Manual Download Page 13

Control Panel

Phaser® 7400 Color Printer

1-8

Control Panel

This section includes:

■

Control Panel Features 

on page 1-8

■

Control Panel Layout 

on page 1-9

■

Menu Map 

on page 1-10

■

Information Pages 

on page 1-10

■

Sample Pages 

on page 1-10

Control Panel Features

The control panel:

■

Displays the printer’s operating status (for example, 

Printing, Ready to Print

), printer 

errors, and warnings.

■

Prompts you to load paper, order and replace supplies, and clear jams.

■

Enables you to access tools and information pages to help resolve problems.

■

Enables you to change printer and network settings.

■

Enables you to access supply status.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for 7400DN - Phaser Color LED Printer





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands