manualshive.com logo in svg

Xerox 7142, Service Manual

Share
Download
Xerox 7142 Service Manual Download Page 18

1 Safety Instructions

RJ-901C/RJ-900C

　

Maintenance Manual

1-6

1.4 Warning Labels

The handling, attachment locations, and types of warning labels are explained below.
Warning labels are attached to areas where care should be taken. Read and understand the positions and 
contents thoroughly before maintenance operation.

1.4.1

Handling the Warning Labels

Make sure to note the following when handling the warning labels.

NOTE

• Make sure that all warning labels can be recognized. If text or illustrations cannot be seen clearly, 

clean or replace the label.

• When cleaning warning labels, use a cloth with water or neutral detergent. Do not use a solvent or 

gasoline.

• If a warning label is damaged, lost, or cannot be recognized, replace the label.

Summary of Contents for 7142






















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands