Xerox 3400N - Phaser B/W Laser Printer, Service Manual

Page: 3 / 81

Read each Caution Carefully:
■
Do not use the printer near water or in inclement weather.
■
Do not place the printer on any unstable surface; the product may fall causing
serious damage to the product. Select a work surface that is large enough to
hold the printer.
■
Slots and openings in the cabinet are provided for ventilation. Do not block
or cover any of these openings. Do not place the printer in an enclosure
unless the enclosure provides adequate ventilation.
■
Never spill liquid of any kind on the printer.
■
Do not place the printer in a location where someone may trip over the cords.
■
Operate this printer using the power source (110 V or 220 V) indicated on the
marking label.
■
If you need to use an extension power cord with this printer, make sure that it
uses a three-wire grounded cord and that the total ampere ratings for all of
the products using the extension do not exceed the extension cord ampere
rating.
■
Do not allow anything to rest on the power cord or interface cables.
■
Unplug the printer from the wall before cleaning. Do not use liquid cleaners
or aerosol sprays. Use a damp cloth for cleaning.
■
Do not touch the surface of the photo-sensitive drum, as marks or scratches
may impair print quality.
■
Do not expose the drum to direct light for extended periods of time.
Symbols as marked on product:
DANGER high voltage:
Protective ground (earth) terminal:
Use caution. Refer to the manual(s) for information: