Xerox 2101, Configuration Manual, Page: 156 / 192

7
7-2 Administering the Fiery EX2101
Setting passwords
N
OTE
:
Passwords described in this section are not the ones for the Windows XP
software which you must enter through the FACI when the Fiery EX2101 is started or
rebooted.
For the Server processes, you can set or change the Administrator password from the
Fiery EX2101 Control Panel, and both Administrator and Operator passwords from
local Setup or remote Setup.
When the Fiery EX2101 is installed, there are no passwords. If you do not create
passwords, users are not required to enter a password to modify the Setup or use the
administrator/operator functions in the job management tools. We
strongly recommend
that you set at least an Administrator password to protect the Fiery EX2101 from
unauthorized changes to Setup. If a password is set previously, you are required to enter
it when you run Setup or access the job management tools with certain privileges.
For more information, see “Passwords” on page 3-3.
Controlling the job flow Using Fiery WebTools and the job management tools
For managing job priorities, tracking current jobs,
canceling jobs, printing jobs in the Hold queue, and
reprinting from the Printed or Hold queue Printing Guide
Job Management Guide
Customer Release Notes
Job accounting Viewing, printing, and exporting the Job Log, user notes
Setting automatic printing and clearing for the Job Log Job Management Guide
Maintaining optimal
Fiery EX2101 performance Tips
Deleting jobs, clearing queues page 7-11 , also
Job Management Guide
Troubleshooting
Troubleshooting Fiery EX2101 Setup Appendix A
For these operations And these tasks See