Xerox 2101, Configuration Manual

Page: 151 / 192

6
6-1 Configuring the Fiery EX2101 and clients for Fiery WebTools
Fiery WebTools allow you to manage your Fiery EX2101 remotely from the Internet
or from your company’s intranet. The Fiery EX2101 has its own home page, from
which you can select a variety of functions, including Status, WebLink,
WebDownloader, WebSetup, WebSpooler, and Installer.
For more information on using Fiery WebTools, see the Printing Guide .
Configuring the Fiery EX2101 and clients for
Fiery WebTools
Fiery WebTools provide access to many Fiery EX2101 functions via the Internet
(or intranet), providing additional flexibility in remote management. You can access
the Fiery WebTools from a Windows or Mac OS computer.
T
O SET UP
F
IERY
W
EB
T
OOLS ON THE
F
IERY
EX2101
1. In Fiery EX2101 Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the Fiery EX2101, and then set the subnet mask.
Set a gateway address, if required.
3. Enable Web Services.
4. In Fiery EX2101 Printer Setup, confirm that the Print queue is published.
T
O SET UP
F
IERY
W
EB
T
OOLS ON A COMPUTER
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
address, if required.
3. Install an Internet browser that supports the Java language and frames.
Make sure Java is enabled. For more information on supported browsers and Fiery
WebTools requirements, see the
Quick Start Guide .
Chapter 6:
Configuring
Fiery WebTools