8 of 17
Creating administrative images
This section describes how to create administrative images of the software components of
Scan
to PC Desktop
onto the network.
Such an administrative installation will extract the necessary files into a network location
specified during the installation. This location is also known as a
Software Distribution Point.
An administrative installation will not install any program files.
Administrators can run an administrative installation from the command line by using the /a
command line option. Users in a workgroup who have access to this administrative image can
then install the product from this source.
SETUP /a
or
MSIEXEC /a <MSI-filename>
The following options can be used together with the SETUP executable:
Setup option
Description
/a
Administrative installation option. This instructs SETUP.exe to perform an
administrative installation instead of a normal installation.
/v
Precedes the list of arguments or properties that are passed to the Windows
Installer.
/L
(followed by the Windows
Language Code)
If applicable, specifies the setup language to use for installation.
The following language codes are supported:
1031=German
1033=English
1034=Spanish
1036=French
1040=Italian
1043=Dutch
Creating administrative images of the components
To create an administrative image
on the network for any application
1. Use the below tables to locate the installer of
the application
on the CD-ROM.
2. Launch SETUP.exe or MSIEXEC with appropriate command line options including the
administrative installation option:
SETUP /a
or
MSIEXEC /a "
ScanSoft PaperPort 10.0.msi"
or e.g. for German setup language:
SETUP /a /L1031
Summary of Contents for 098S04703
Page 1: ...Version 7 0...
