Petrel-X User Manual 1.1
4
Preliminary Setup
Outside Diagram
The Petrel-X has several items of note to help identify a specific device. Shown below are those
identifiers along with key sections.
1 The AIS antenna is screwed into the top of the Petrel-X and must be installed before
operation
2 The on/off LED of the Petrel-X is located here. The titanium sections above and below the
glass must be shorted to trigger the water sense
3 The magnet switch for turning the Petrel-X on and off is located directly below the glass
4 The meeting point of the electronics head and battery chamber is torqued and should not
be opened. A sealing O-ring is installed here.
5 The factory serial number of the Petrel-X is on the label.
6 A QR code is available to scan to download the manual on the label
7 The bottom endcap is hand-tight for battery replacement. A sealing O-ring is installed here.
Physical Connection (Remote Head)
Pin Number
Name
1
N/C
2
N/C
3
N/C
4
+V Battery
5
N/C
6
Ground
Connector: MCBH-6F-TI, External View