background image

 

Rover User Manual Version 3.0 

 

44 

Warranty, Support and Limited Liability 

Xeos  Technologies  Inc.  warranties  the  Rover  Beacon  to  be  free  of  defects  in  material  or 
manufacturing  for  a  period  of  one  year  following  delivery.  Liability  is  limited  to  repair  or 
replacement of the defective part and will be done free of charge. 

LIMITED WARRANTY: Xeos Technologies Inc. warrants that the product will perform substantially 
in accordance with the accompanying written materials for a period of one year from the date of 
receipt. 

CUSTOMER REMEDIES: Xeos Technologies Inc. entire liability and your exclusive remedy shall be 
at Xeos Technologies Inc. option, either (a) return of the price paid or (b) repair or replacement 
of the product that does not meet Xeos Technologies Inc. Limited Warranty and that is returned 
to Xeos Technologies Inc. with a copy of your receipt. This Limited Warranty is void if failure of 
the product has resulted from accident, abuse, or misapplication. Any replacement product will 
be warranted for the remainder of the original warranty period or ninety (90) days, whichever is 
longer. 

NO OTHER WARRANTIES: Xeos Technologies Inc. disclaims all other warranties, either express or 
implied,  including  but  not  limited  to  implied  warranties  of  merchantability  and  fitness  for  a 
purpose,  with  respect  to  the  product  or  the  accompanying  written  materials.  This  limited 
warranty gives you specific legal rights. You may have others, which vary from state to state. 

NO  LIABILITY  FOR  CONSEQUENTIAL  DAMAGES:  In  no  event  shall  Xeos  Technologies  Inc.  or  its 
suppliers be liable for any damages whatsoever (including, without limitation, damages for loss 
of equipment, for loss of business profits, business interruption, loss of business information, or 
other  pecuniary  loss)  arising  out  of  the  use  of  or  inability  to  use  this  Xeos  Technologies  Inc. 
product, even if Xeos Technologies Inc. has been advised of the possibility of such damages. 

Summary of Contents for Rover













































Reviews: