Setup your graphics tablet on Android OS
5
X1-640
Xenx graphics tablet supports plug and play on Android OS 6 or later. Default orientation of the
drawing area is in landscape mode. When using Xenx tablet an Android phone, you may find ratio
distortion.
To switch the Xenx tablet to match the phone aspect ratio, please follow the steps below:
Xenx graphics tablets only support Android OS 6.0 or later. For some Android devices, the USB OTG
function is disabled by default. Please check with your Android device manufacturer for setting up the
OTG function.
Please note that the shortcut keys on tablet and pen are not supported in Android devices.
Only USB Type-C OTG adapter is provided with Xenx graphics tablet.
Note
Connect XENX tablet to your Android phone with Type-C OTG adaptor.
Launch your drawing or writing app.
Press and hold both the top and bottom buttons at the same time for 5 seconds.
XENX tablet will switch to portrait mode to fit your phone orientation.
To switch back to landscape mode for your PC or Mac, press and hold the two buttons again for
5 seconds.
1
2
3
4
5
Step 1
Step 3
Step 4
USB
USB
OTG
OTG
Type-C
Type-C
K1
K1
K1
K2
K2
K2
K3
K3
K3
K4
K4
K4
K5
K5
K5
