7
EN
The PB and IPC converters are galvanic isolated. This means that
you can connect any loading without worrying about the
interruption from input to the output, they aren’t directly
connected. Parallel operation of the same types gives great
flexibility to expand the power whenever is needed.
I N S T R U C T I O N S
Mounting
The converter has to be mounted in a space that complies with
the following:
-
Leave enough space on all sides of the converter (min. 5 cm.)
for air circulation. In addition, make sure that there are
ventilation vents.
-
The optimum ambient temperature is between 15ºC and
25 ºC.
-
Mount the converter in a dry place where there is no chance of it
being affected by moisture or dirt.
-
Keep the converter out of the reach of children.
-
A working converter produces a dangerous voltage.
-
Do not use the converter in places where gases are released or
flammable materials are stored.
-
It is normal that the converter case is warm when there is a load.
-
The converter is not suitable for outdoor use.
Connection
1.
The input of the converter is fitted with a red and black cable
for connection to the battery. Connect the red cable to the
positive pole and the black cable to the negative pole of the
battery. Make sure that the correct cable is connected to the
correct pole. The converter will become defective if the poles
are reversed. In this case the reparation cost are not covered
by the guarantee.
