background image

    IMPORTANT SAFETY INFORMATION 

 

 

Read these instructions carefully. 

 

Keep these instructions safe for later use. 

 

Unplug the speakers from the computer and from the electrical outlet before cleaning them with a dry cloth. 

 

Install in accordance with the manufacturer’s instructions. 

 

Place the speakers in a stable location so they will not fall, causing damage to the speakers or bodily harm. 

 

Do not use the speakers near water, and do not immerse them in a liquid or pour any liquid on them. 

 

Do not block the openings in the speaker cabinets, never push objects in to speaker vents or slots because of fire or electric 
shock hazards and provide sufficient space around the speakers for proper ventilation. 

 

 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

 

 

Do not defeat the safety purpose of the polarized plug. A polarised plug has two blades with one wider than the other. The 
wide blade is provided for your safety. If the provided plug does not fit in to your outlet, consult an electrician for 
replacement of the obsolete outlet.

 

 

Operate the speakers only from the low level audio line out jack of the computer or of an audio device.

 

 

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where 
they exit from the apparatus.

 

 

Only use attachments/accessories specified by the manufacturer.

 

 

For added protection during lighting storms, unplug the speakers from the electrical outlet and turn off the computer. 

 

Unplug this apparatus when unused for long periods of time. 

 

Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug has 
been damaged, liquid has been spilled or objects have fallen in to the apparatus, the apparatus has been exposed to rain or 
moisture, does not operate normally or has been dropped. 

 

Refer all servicing to qualified service personnel. 

 

The speakers should be disconnected from the mains by placing the power/standby switch in the standby position and 
unplugging the power cord of the speakers from the AC mains receptacle. 

 

Do not place any form of open flame source such as lighted candles on the apparatus. 

 

The socket-outlet shall be installed near the equipment and shall be readily accessible. 

 
 

WARNING: 

 

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE! 

Summary of Contents for X-Force 1H














Reviews: