MAINTENANCE INSTRUCTIONS
MAINTENANCE INSTRUCTIONS
CLEANING - Unplug the charger before attempting any cleaning. If it becomes necessary to clean the enclosure, wipe
the exterior of the enclosure with a damp cloth and a mild detergent. Do not use an abrasive cleanser. Do not spray
cleaners directly onto the charger or immerse unit in water.
BATTERY CHARGER SPECIFICATIONS
BATTERY CHARGER SPECIFICATIONS
Operating temperature
0 to 40
E
C (32 to 104
E
F)
Storage temperature
-40 to 80
E
C (-40 to 176
E
F)
Dimensions
H 3.8" (9.65 cm) x W 2.8" (7.1 cm) x D 2.8" (7.1 cm)
Weight
Less than 1.5 lbs (0.68 kg) with standard output cable
Power Requirements
120 V~, 60 Hz, .2 A RMS
OUTPUT RATINGS:
@ 20
E
C
Unit
MHTX-7
Charge Amps
C/10 or 0.1C, where C = Battery Capacity
(50 to 500 mA, refer to marking label on unit)
Float Amps
C/40 or 0.025C, where C = Battery Capacity
(Approximately 1/4 of rated output current)
Charge Voltage
Floats with respect to Battery Voltage
Reset Voltage
Approximately 21 volts (will switch into float mode)
Open Circuit Voltage
Approximately 25 volts
Charge Timer
14 hours ± 1 hr.
Battery
Rechargeable Nickel Metal Hydride, 1.2 to 14.4 Volts (1 to 12 cells)
500 mAHr to 5 AHr
Refer any questions to XENOTRONIX Inc.
Monday-Friday 8:30am to 4:30pm ET
tel. 407-331-4793
fax. 407-331-4708
XENOTRONIX Inc. 8/00
Document MN2-MHTX7
