AN AUTHORIZED SUPPLIER
OF HELMETS TO THE NFL
INTRODUCTION
A PROPER FIT IS INTEGRAL TO A HELMET’S PERFORMANCE.
PLEASE READ THE FOLLOWING INSTRUCTIONS TO BE SURE
YOUR EPIC IS FITTED PROPERLY. YOU CAN ALSO VISIT
XENITH.COM TO VIEW OUR FITTING INSTRUCTION VIDEO.
STEP 1
MEASURE YOUR HEAD
EPIC Varsity
SUGGESTED SIZE GUIDE
USING A STANDARD MEASURING TAPE, MEASURE THE
CIRCUMFERENCE OF YOUR HEAD AN INCH ABOVE YOUR
EYEBROWS. THEN CONSULT THE XENITH EPIC SIZE
GUIDE BELOW AND CHOOSE YOUR CORRECT SIZE EPIC
HELMET.
STEP 2
PROPER SETUP
UNBUCKLE ALL FOUR SNAP BUCKLES AND FEED THE
CHINSTRAPS THROUGH THE FIRST SLOT OF THE SNAP
BUCKLES ONLY. THIS WILL MAKE IT EASIER TO ADJUST
THE CHINSTRAPS DURING FITTING.
ENSURE THE HELMET IS SEATED PROPERLY ON YOUR
HEAD. THE FRONT EDGE OF THE HELMET SHOULD REST
JUST ABOVE YOUR BROW, AND NOT BE ROTATED
EXCESSIVELY FORWARD OR BACKWARD. IF YOU ARE
BETWEEN SIZES, CHOOSE THE LARGER SIZE AND
INSERT THICKER COMFORT PADS.
STEP 3
SEAT THE HELMET ON YOUR HEAD
STEP 4
CINCH THE LOW STRAPS
PULL THE LOW CHINSTRAPS OUTWARD, WHICH WILL
CAUSE THE CHINCUP TO SLIDE UP TO MEET YOUR CHIN,
AND THE SHOCK BONNET TO SNUG DOWN AROUND
YOUR HEAD. BE SURE TO PULL EVENLY ON BOTH SIDES
SO THAT THE CHINCUP STAYS CENTERED. DO NOT
OVER-TIGHTEN, AS THIS MAY CAUSE DISCOMFORT.
FITTING INSTRUCTIONS