Xenics Bobcat-640-CL Industrial, User Manual

Page: 23 / 24

User Manual
Bobcat-640-GigE&CL Camera
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third party
without written permission from Xenics.
Xenics nv T +32 16 38 99 00 Doc Ref: ENG-2012-UMN020
Ambachtenlaan 44 F +32 16 38 99 01 Issue: R000.12
BE-3001 Leuven

Belgium www.xenics.com Date: 29/10/2013
XF-104_02/20-01-2012
Page 23 of 24
6.4. Camera Properties
Within Xeneth a html description of the camera properties is available. To select the
camera property documentation, right click on the camera icon and select ‘Show property
documentation’ (see
Figure 6-3 ).
Figure 6-3 Camera properties settings tab
For the Bobcat-640: the following properties and functionality are accessible by the user:
- Detector Operation
o
Exposure time control: auto (only for Bobcat-CL) or manual (see also (Ref.
4))
o
ROIC settings: IWR or ITR mode
o
Bias Voltages
- Image acquisition
o
Windowing / FlipX&Y
o
Trigger operation
- Image processing
o
Pixel correction (FPN/PRNU/BPR): TrueNUC or Fixed NUC
o
Gain and offset control: Auto or Manual (see also (Ref. 3) )
- Non-volatile memory
o
User settings
o
Calibrations
- Firmware Upgrade
More information can be found in (Ref. 5).