XENIA TL-291220, Instruction Manual

Page: 3 / 17

4
• Before using checks that the appliance functions properly. The
appliance should not be used if:
• The connecting cable is damaged
• The appliance shows noticeable damage
• The appliance has been dropped
• Never wind the main cable around the appliance.
• The main cable must not come into contact with hot appliance
parts and should never run between the straightening brush.
• Only insert the main cable plug to power supply when the
appliance is switched off.
• The appliance must not come into contact with flammable
material. It must also not be used near flammable material
because the straightener brush teeth reach temperature of
approx. 220˚C.
• Never cover the straightening brush teeth with any object.
• The appliance must never be switched on when the clamped
together. Ensure that the appliance is open.
• Children are not aware of the hazards of electrical appliances.
Therefore close supervision is necessary when the appliance is
used by children.
• If the appliance does not function properly
• Before cleaning and after every use
• Do not pull on the main cable and do not carry the appliance
by means of the cable.
• Always disconnect the appliance from the power supply and
allow the appliance to cool down before cleaning and
maintenance, or if faults occur during operation.
• Do not use the main cable to pull on the plug nor remove the
plug from the socket with wet hands.
WARNING
Risk of burns from the straightening plates and hot
appliance parts. Never grasp the appliance by or near
the straightening brush teeth when the appliance is on.
The straightening brush teeth can cause burns. Avoid
contact with the skin and eyes. Never transport the
appliance when hot.
REMOVE THE PLUG FROM THE POWER SUPPLY