12
Connect signal source
1.
Connect the 20-PIN connector on the black monitor cable to the back of the
700IDT. Route the cable through the dash to your PC.
2.
Connect the D-Sub15 15-PIN VGA connector to your computer’s monitor output.
3.
Connect the Yellow RCA plug labeled 1 and 2 to your composite video sources if
required (e.g. Video Game console, Camera, DVD-Player, etc.) The white RCA
plug labeled 3 is non-functional.
4.
Connect the USB connector to your computer’s USB port
after
you have installed
the Touch Screen driver.
Install the Touch Screen Driver for Microsoft Windows XP:
Here is a simple walk through of Windows XP Touch Driver Installation for 800TSV.
You can skip this step if you have the 800YV.
1.
Click on Start, Run, and Enter D:\Win2000_XP \Setup.exe (Please change the
drive letter corresponding to the drive containing the installation CD). Click
OK
.
2.
The Install Wizard window appears. Click
Next
.
3.
Click
Next
to continue. Please leave the check box next to “PS2 Touchscreen
Driver”
unchecked.
5
2.
Rear View
3.
Side View
Signal Cable socket
Mounting Bracket
Screw holes for
Mounting Sleeve
Sleeve
Power cable socket
12V DC in
Cable holder