On Screen Display functions description:
The OSD can be turn on by pressing the button “M”.
Brightness
- Adjust brightness by pressing the Increase/Decrease buttons.
Increase the
number for higher brightness. Decrease the number for lower brightness.
Contrast
- Adjust contrast by pressing the Increase/Decrease buttons.
Increase the
number for higher contrast. Decrease the number for lower contrast.
Saturation
- Adjust saturation of color. (Valid in Video 1 in Video 2 only)
Horz Pos
- Adjust Horizontal position by pressing the Increase/Decrease buttons.
Vert Pos
- Adjust Vertical position by pressing the Increase/Decrease buttons.
Phase
- Adjust CLK phase alignment by pressing the Increase/Decrease buttons.
Image flicker can by avoided by CLK phase adjustment. (Valid in the VGA
mode only)
Auto Detect
- Adjust display automatically. (Valid in the VGA mode only)
Default
- Load default setting.
Dimmer
- Chose one of the three CCFL backlight output level.
AV2 First
- Set whether to have monitor switch to Video Input 2 automatically if a
signal is present. Good for car reverse monitoring system. Default is No.
Format
- Select between 16:9 and 4:3 modes. (Valid in Video 1 and Video 2 only)
Mirror
- Mirror Image Flip. This function mirrors the display.
Inverse
- Vertical Image Flip. This function flips the display upside down.
External Specifications:
Video Source Input
•
RGB analog male connector (15-Pin D-SUB) x 1
•
RCA composite video female connector x 2
Audio Source Input
•
RCA audio female connector x 1
Touch Panel I/O
•
USB connector x 1 (1020TSV)
Power Source Input
•
Single 12V DC_IN (Supports 11V ~ 24V)
Internal Specifications:
LCD Module
: 10.2” Digital TFT LCD
LCD Native resolution
: 800 x 480 (2400 x 480 dots)
Pixel
Pitch
:
0.1905
x
0.1905
mm
LCD Panel Brightness
: 500 NIT (max.) / 450 NIT (typ.)
Contrast
:
300
:
1
Response Time
: 12ms (rise) / 18ms (fall)
Viewing Angle
: Vertical: 110 / Horizontal: 120
Supported display resolution
: 640 x 480 ~ 1024 x 768
Supported refresh rate
: 60 ~ 75 Hertz
Video
Format
:
NTSC/PAL
Auto-detect
Colors
:
18-bit
(262,144
Colors)
Inverter
Inside
:
Adjustable
output
w/
Power
Mgmt
Electrical Characteristics:
Absolute Maximum Ratings:
Parameter Symbol
Min
Max
Unit
Analog Signal Input Level
Signal
0
1.4
Vp-p
Power Supply
DC IN
11
24
V
Digital Signal Input Level
-
-
5+0.3
V
Operation Temperature
-
-14
176
ºF
Recommended Operating Conditions:
Parameter
Symbol
Min
Typical
Max
Unit
Signal 0.5 0.7
1.2 Vp-p
Analog Signal Input Level
RGB/Composite AV
DC GND -
0.3 V
DC IN
11
12
24
V
Power Supply
Current 0.59 0.72
0.74 A
Power Consumption:
Standby mode < 0.3W
Suspend mode < 3W
Continue mode < 4W (w/o inverter), < 9W (w/ inverter)
Inverter output specifications:
Power supply: +12V
Lamp frequency: 50KHz
Max output open voltage: 1300Vrms
Power consumption: < 5W
