Xembedded XPMC-9100, Manual

Page: 17 / 32

Installation Guide XCPC-9100
Switch Description
SW1 to SW4
SW1 Pin 16 and 15 to PMC I/O Pin 2
Pin 1, 3, 5 and 7 ON (Closed) signal to GbE Switch
PMC Site Two
SW1 Pin 14 and 13 to PMC I/O Pin 4
Pin 2, 4, 6 and 8 ON (Closed) signal to cPCI J5
SW1 Pin 12 and 11 to PMC I/O Pin 8
GbE Port one of the PMC
SW1 Pin 10 and 9 to PMC I/O Pin 10
SW2 Pin 16 and 15 to PMC I/O Pin 1
Pin 1, 3, 5 and 7 ON (Closed) signal to GbE Switch
SW2 Pin 14 and 13 to PMC I/O Pin 3
Pin 2, 4, 6 and 8 ON (Closed) signal to cPCI J5
SW2 Pin 12 and 11 to PMC I/O Pin 7
GbE Port one of the PMC
SW2 Pin 10 and 9 to PMC I/O Pin 9
SW3 Pin 16 and 15 to PMC I/O Pin 14
Pin 1, 3, 5 and 7 ON (Closed) signal to GbE Switch
SW3 Pin 14 and 13 to PMC I/O Pin 16
Pin 2, 4, 6 and 8 ON (Closed) signal to cPCI J5
SW3 Pin 12 and 11 to PMC I/O Pin 20
GbE Port one of the PMC
SW3 Pin 10 and 9 to PMC I/O Pin 22
SW4 Pin 16 and 15 to PMC I/O Pin 13
Pin 1, 3, 5 and 7 ON (Closed) signal to GbE Switch
SW4 Pin 14 and 13 to PMC I/O Pin 15
Pin 2, 4, 6 and 8 ON (Closed) signal to cPCI J5
SW4 Pin 12 and 11 to PMC I/O Pin 19
GbE Port one of the PMC
SW4 Pin 10 and 9 to PMC I/O Pin 21
SW5 to SW8
SW5 Pin 16 and 15 to PMC I/O Pin 2
Pin 1, 3, 5 and 7 ON (Closed) signal to GbE Switch
PMC Site One
SW5 Pin 14 and 13 to PMC I/O Pin 4
Pin 2, 4, 6 and 8 ON (Closed) signal to cPCI J5
SW5 Pin 12 and 11 to PMC I/O Pin 8
GbE Port one of the PMC
SW1 Pin 10 and 9 to PMC I/O Pin 10
SW2 Pin 16 and 15 to PMC I/O Pin 1
Pin 1, 3, 5 and 7 ON (Closed) signal to GbE Switch
SW2 Pin 14 and 13 to PMC I/O Pin 3
Pin 2, 4, 6 and 8 ON (Closed) signal to cPCI J5
SW2 Pin 12 and 11 to PMC I/O Pin 7
GbE Port one of the PMC
SW2 Pin 10 and 9 to PMC I/O Pin 9
SW3 Pin 16 and 15 to PMC I/O Pin 14
Pin 1, 3, 5 and 7 ON (Closed) signal to GbE Switch
SW3 Pin 14 and 13 to PMC I/O Pin 16
Pin 2, 4, 6 and 8 ON (Closed) signal to cPCI J5
SW3 Pin 12 and 11 to PMC I/O Pin 20
GbE Port one of the PMC
SW3 Pin 10 and 9 to PMC I/O Pin 22
SW4 Pin 16 and 15 to PMC I/O Pin 13
Pin 1, 3, 5 and 7 ON (Closed) signal to GbE Switch
SW4 Pin 14 and 13 to PMC I/O Pin 15
Pin 2, 4, 6 and 8 ON (Closed) signal to cPCI J5
SW4 Pin 12 and 11 to PMC I/O Pin 19
GbE Port one of the PMC
SW4 Pin 10 and 9 to PMC I/O Pin 21
SW9
Factory Settings
All Off (Open)
Table 2-2 PMC site Rear I/O switch settings
NOTE: The signal for the PMC I/O J4 should either be routed to the cPCI J5 or to the on board GbE
switch Fabric. For example closing (ON position) for the SW1 Pin1 and Pin2 is not allowed. Depending on
the I/O which is on the PMC, routing to both the cPCI J5 and GbE Ethernet switch may damage the
module.
10