Select
Load
from the
File
menu to open the
Load File dialog box
, as illustrated
below. The red labels refer to the numbered notations follow this figure.
1.
Buffer
. To select the
Buffer
name from the drop down list. The system loads
the file data into the buffer accordingly.
2.
File Name
. To enter the name of the data file to load it, or you can select
Browse
and choose the file using the
Select File box
.
3.
File Type
. To select the type of the file from a drop down list. Different file
types are included here, e.g. Binary, Intel Hex, Motorola S record, JEDEC,
POF, TI, etc.
4.
File Mode
. To select one of the following File Modes from the drop down list:
•
Normal
to load the whole file
•
Even
to load the first byte and discard the second byte out of every
two bytes
•
Odd
to discard the first byte and load the second byte out of every
two bytes
•
1st byte of 4
to load first byte and discard the other three bytes out of
every four bytes
