Structure
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not place any product referred in this manual long-term in the extreme environment
6. Install in accordance with the manufacturer’s instructions.
7. Use accessories only specified by the manufacturer.
8. Refer all servicing to the qualified service personnel.Servicing is required when the product has been
damaged in any way, such as handle or mortise is damaged,product has been exposed to rain or moisture,
does not operate normally.
INTRODUCTION
Congratulations on your selection of the XEEDER Stand-alone keycard lock. This is a solution that replace
traditional key locks and carry out a modern, efficient and safe management of the rooms in family and
apartment.
Before using the instrument, be sure to carefully read through the instructions contained in this manual.
Please keep all information for future reference.
SAFETY
Xeeder Stand-alone keycard lock (RFID & IC) product has been designed with the highest concern for
safety.However, any device,if used improperly, has the potential for causing unlock unable and indirect
personal injury.
To help ensure accident-free operation, follow these guidelines:
1.Lock requires AA battery x4pcs to provide power keep running even not ready any card.
Alkaline battery is suggested for gives a long using term (10-12months).
2.Replace new battery on time if you get low battery alarm-3beeps and red flash when read card finished.
3.You have 200 times last unlocking chance since lock gives low battery alarm.
4.Do not use battery mix new and old. It may cause short circuit to lock eletronic part.
5.Lock’s latch part is in mechanically, You can unlock it by using emergency key in urgently.
6.This product was designed for indoor use only including home, office and apartment.
1
Keycard
open the door.
Family & apartment
Keycard lock
installed on the door
stand-alone
lock
