Xeda International CEDAX ELECTROFOG EWV10, Instruction Manual

Page: 8 / 84

EWV
- 6 -
INTRODUCTION ELECTROFOG
0.3 METHOD USED FOR UPDATING
The Manufacturer reserves the right to modify the
design and make improvements to the Machine without
communicating it to Customers and without updating the
Manual already delivered to the user.
Moreover, if changes, which have been agreed with the
Manufacturer, are made to the Machine installed at the
Customer’s premises and involve the modification of one
or more chapters of the Instruction Manual, it will be the
responsibility of the Manufacturer to send the chapters
affected by the modification, together with the new global
revision model, to the holders of the Instruction Manual.
It is the responsibility of the user to follow the instructions
accompanying the updated documentation and replace
the old chapters with the new ones, the home page and
the index with those with the new revision level.
The Manufacturer is responsible for the descriptions
provided in Italian; any translations cannot be fully verified,
so, if an inconsistency is detected, the version in Italian
should be consulted and our sales office contacted, where
possible, which will make the any modification deemed
appropriate.