Created in September 2019
A-CB 20190906E
XEBEC TECHNOLOGY CO.,LTD.
Fuerte Kojimachi 1
・
7 Building, 1-7-25,
Koujimachi, Chiyoda-ku, Tokyo, 102-0083, Japan
TEL. +81-3-6893-0810 FAX. +81-3-5211-8964
© 2019 XEBEC TECHNOLOGY CO.,LTD.
2/3 Page
2/3 Page
Slide ring
Specifications
Tool configuration
Dimensions
Accessories:
Screws (M5 cap screw) x4
Hexagonal hex wrench x 1
Accessories:
Screws (M5 set screw) x3
Hexagonal hex wrench x 1
Accessories:
Screws (M5 extra low head cap screw) x1
Flat washer x1
Hexagonal hex wrench x 1
Shank (fits all sizes)
Base holder (fits all sizes)
Ring (differs depending on the brush
diameter)
Brush
diameter
(mm)
Product code
φ125
SR125M
φ165
SR165M
φ200
SR200M
Brush diameter
(mm)
Bristle
(Color)
Product code
φ125
A11 (Red)
A11-CB125M
A21 (White)
A21-CB125M
A32 (Blue)
A32-CB125M
φ165
A11 (Red)
A11-CB165M
A21 (White)
A21-CB165M
A32 (Blue)
A32-CB165M
φ200
A11 (Red)
A11-CB200M
A21 (White)
A21-CB200M
A32 (Blue)
A32-CB200M
* The ring is a
consumable. Replace
when there is
looseness where it is
fitted, or if wear to
the bristles becomes
noticeable.
Brush
Product range
Product range
Brush
diameter
D
2
(mm)
Overall
length
L
1
(mm)
Bristle
length
L
2
(mm)
Ring
diameter
D
1
(mm)
Shank
diameter
D
3
(mm)
Weight (g)
φ125
182 to 192
75
135
25
1920
φ165
176
2320
φ200
211
2750
Processing conditions
Brush
diameter
(mm)
Depth of cut
(mm)
Rotational speed
(min
-1
)
Feed rate
(mm/min)
Brush projection
(mm)
Vertical
burr
Horizontal
burr
Cutter
mark
removal
Polishing
Maximum
Recommend
ed
Maximum
Burr root
thickness
(mm)
Cutter
mark
removal
Recommende
d
Maximum
0.05
0.1
φ125
0.5
1.0
0.5
0.3 to 0.5
1.5
800
1000
4000
2500
300
15
20
φ165
0.5
1.0
0.5
0.3 to 0.5
1.5
600
750
4000
2500
300
15
20
φ200
0.5
1.0
0.5
0.3 to 0.5
1.5
480
600
4000
2500
300
15
20
Do not use the product while exceeding the maximum rotational speed, depth of cut, or brush projection.
The product is most effective when machining with the tip of the bristle.
If used with an excessive depth of cut or grinding load, the intended effects of the tool will not be achieved and there will be significant progress of wear and breakage
of the fiber material, resulting in shorter tool life.
A slide ring is fitted to the brush in order to slide the base holder to adjust the brush projection and adjust the flexibility and conformability.
A longer amount of brush projection increases flexibility and conformability, while a shorter amount of brush projection reduces flexibility and conformability.
Situation
Deburring
Cutter mark removal and polishing
If burrs and cutter marks
are not completely
removed
While remaining aware of the
maximum rotational speed,
increase the rotational speed
by 25% each.
Reduce the feed rate by 10 to
20% each.
Increase the number of passes.
While remaining aware of the
maximum rotational speed,
increase the rotational speed by
25% each.
If burrs and cutter marks
are removed but the edge
is too rounded
Reduce the rotational speed by
25% each.
Increase the feed rate by 10 to
20% each.
Reduce the rotational speed by
25% each.
Increase the feed rate by 20 to
40% each.
To increase the tool life
If burrs and cutter marks
are removed but the brush
is worn unevenly
Double the feed rate and process in return passages
Process with reverse rotation of the brush on the return path (Refer to
the figure at right)
Brush reverse rotation
Forward brush rotation
* The feed rate will be at double
feed rate for one passage of a
path one way.
Figure: When there is uneven wearing
Initial processing conditions
Guide to adjustments
XEBEC Brush
TM
Surface Extra-Large
Instruction Manual
D
1
D
3
D
2
L
1
L
2
