xDEEP NX Series, User Manual

Page: 6 / 20

03
10
The products described in the following instruction have
been a subject of certification in a recognized unit and
meet the requirements of 89/686/EWG directive and of
the norm EN 1809:2014-09, synchronized with this direc-
tive, in its full extent; and of EN 250:2003-08 covering
scuba harness.
The compliance assessment of PROJECT compensator
and NX Series diving harness was performed by:
Polski Rejestr Statków S.A.,
Recognised certification unit nr 1463
Al.Gen.Józefa Hallera 126
80-416 Gdańsk
Poland
PROJECT buoyancy compensators has been certified as
compatible with 89/686/EWG directive, as far as it con-
tains air compatible with EN 12021 norm. Regarding the
lack of EN norms for safety requirements while the use
of it takes place with mixtures of higher oxygen content,
the above mentioned buoyancy compensator cannot be
regarded as one which has been a subject of CE certifica -
tion with gas mixtures with oxygen level higher than 21%
(+/- 2%) as stated in 89/686/EWG directive.
CE CERTIFICATION
10
WARNING
IN NON-EU COUNTRIES ADDITIONAL CONDITIONS, LAW REQUIREMENTS AND BUOYANCY COMPENSATOR
NORMS MAY EXIST. DOUBLE CHECk THE CURRENT REQUIREMENTS IN THE COUNTRY IN WHICH YOU INTEND
TO USE IT.
WARNING
THE BUOYANCY COMPENSATOR IS NOT A SAFETY JACkET: IT DOES NOT GUARANTEE A PROPER HEAD-UP
POSITION ON THE SURFACE.
SAFETY RULES