English
22
correct, and try to make more than
one attempt.
• Only Windows 98SE operation
system requires Windows 98S driv-
ing program
• If Windows 98S driving program is
installed in Windows XP, 2000 or ME,
some problem may occur. You must
unload this driving program
• If USB extension card is used, you
can try direct connection (some
extension card is not equipped with
power supply and may not be able
to apply with PMP)
• If USB port in the front of PC is
used, you can try to connect to USB
port on the back of PC, because
the port in the front is usually used
to connect extension card not
equipped with power supply
• In older model of PC, the USB
driving program in PC may have
become outdated. To find out the
type of USB circuit, please enter
My computer > Properties > Device
driver > Universal serial bus (USB)
controllers > t controller.
To connect computer with USB
cable is guided as
1)Open the PMP and enter into “set
up”(PLS do not connect it to the
computer with USB at first);
2)Enter into “system”;
)Make sure the cursor is in
the”USB Mode” and press “LEFT”
button;
And then it will show on the ssreen”
Please connect to PC or press OK
to return”(PLS do not press “OK”
button), only at this moment you
may connect the PMP and compu-
ter with the USB cable and it will be
workable.
Remark:when the PMP is connected
to computer, it will not be operated
at the same time when you operate
in the computer.
2. Charging and power supply
Battery need not be discharged
prior to charging.
If the charging indicator is full, the
battery can only support short-time
playing after disconnecting the
adaptor. In this case, go on with
charging because normal charging
time is above 4 hours.
501IM.indd 22
30.03.2007 12:26:54
