User Manual
©2023 XCOM Labs
5
REGULATORY WARRANTY SAFETY AND PRIVACY
This Guide contains safety, handling, disposal, regulatory, trademark, copyright, and software licensing
information. Read all safety information below and operating instructions before using the MWC-434m
WiGig Module and commercial HMD devices for specific model numbers.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
IMPORTANT NOTE
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. Under no circumstances should the MWC-434m WiGig Module and
HMD be used in any areas (a) where blasting is in progress, (b) where explosive atmospheres may be
present, or (c) that are near (i) medical or life support equipment, or (ii) any equipment which may be
susceptible to any form of radio interference. In such areas, the MWC-434m WiGig Module and HMD
MUST BE POWERED OFF AT ALL TIMES (since the modem could otherwise transmit signals that might
interfere with such equipment). In addition, under no circumstances should the MWC-434m WiGig Module
and HMD be used in any aircraft, regardless of whether the aircraft is on the ground or in flight. In any
aircraft, the MWC-434m WiGig Module and HMD MUST BE POWERED OFF AT ALL TIMES (since the
equipment could otherwise transmit signals that might interfere with various onboard systems on such
aircraft).
Due to the nature of wireless communications, transmission and reception of data by the MWC-434m
WiGig Module and HMD can never be guaranteed, and it is possible that data communicated or
transmitted wirelessly may be delayed, intercepted, corrupted, contain errors, or totally lost.
Warning: This product is only to be installed by qualified personnel.
