26
XciteRC Runner 250
EN
Transmitter
·
Battery charging
Transmitter
0
+
0
+
SWB Mode switch
Auxiliary channel 1
2.4GHz Antenna
Auxiliary channel 2
SWA Mode switch
Manual Mode Indicator Light
One key To Return Home Mode
Power ON/OFF
Trimmer
Stable Mode Indicator Light
Buzzer speaker
Power indicator light
Forward/Backward
Left side/Right side flying stick
Low voltage indicator light
Throttle
Turning Left/Right Stick
Battery charging
WARNING:
Be sure to read all safety instructions regarding the use of rechargeable batteries. Charging
may take place only with the supplied charger on a fireproof surface and under constant adult supervision -
fire or explosion hazard!
• Connect the power supply with the charger. The green LED lights up.
• Connect the batteries balancer wire with the charger.
•
WARNING:
The balancer connector is polarized. Check the side channels. Do not use force -
fire
or explosion hazard!
• The red LED lights to indicate charging. Charging time is about 5 hours. If the battery is fully charged, the
red LED goes out.
• Unplug the battery from the charger and also the power supply from the jack.
The flight time of the Quadrocopter is about 15 minutes.
