Page 3 of 3
R
FLASH
STROBE
FADE
SMOOTH
ON
OFF
R
G
B
W
9
11
10
Product Name:
+44(0)1952 292441
[email protected]
Document No:
V1
Tamlite Technical
Stafford Park 12,
Telford, Shropshire,
TF3 3BJ
INSTALLATION & OPERATING INSTRUCTIONS
IP65
-240V
50/60Hz
ta
0°C to 25°C
Turn ON/OFF:
Press the ‘ON’ button to turn the light on, or press the ‘OFF’
button to turn the light off.
RGB (red/green/blue) colour selection:
The desired colour can be selected by pressing the
corresponding printed button i.e. Blue button for Blue light.
Brightness control:
To change the brightness of the light press the button to
increase or the button to decrease the intensity.
Dynamic mode:
The dynamic option can be switched on by pressing the ‘FLASH’,
‘STROBE’, ‘SMOOTH’ or ‘FADE’ button. The colours will
automatically change in a programmed tempo. To switch off the
dynamic mode press any colour button.
Connect the controller to the plug in power supply.
Remove the plastic tab from the handset to enable operation.
Plug the power supply in to the wall socket.
