FEB/27/2004 Art.Nr: 3300-6652 Kompaktalarm SX3
XCESS
SX3
Rev.1.0
www.autoalarm24.de
4
+
Arming with Voltage Sensor Bypass
Press the
and buttons
together
- F
Arming with Pathway Illumination
Press the
button first within 3 seconds
press
F
F -
Silent Arm
Press the
F
button first within 3 seconds
press
Car Locator
Upon
Armed,
Press and release
momentarily
(3 seconds)
Panic
Press and Hold
button
for 3 seconds
Disarm System
Press and release momentarily
- F
Disarming with Pathway Illumination
Press the
button first within 3 seconds
press
F
F -
Silent Disarm
Press the
F
button first within 3 seconds
press
C.LED INDICATORS:
LED Status
Off Disarmed
Slow flash
Armed
2 flashes... pause
Zone 2 / Activated on the Blue wire
3 flashes... pause
Zone 3 / Activated on change in Voltage such as the interior light turning on.
4 flashes... pause
Zone 4 / Activated on the Shock Sensor
5 flashes... pause
Zone 5 / Activated on the Ignition Switch
D. CHIRP INDICATORS: E. PARKING LIGHT:
Chirp Function
Parking
light
Function
1 chirp
Arm
1 flash
Arm
2 chirps
Disarm
2 flashes
Disarm
4 chirps
Disarm / Triggered
3 flashes
Disarm / Triggered
6 chirps
Car locator
12 flashes
Car locator
F. ACTIVE ARMING:
1. Press button on transmitter.
2. The siren will chirp once and the parking light will flash once indicating the system is armed. The LED will begin to
flash and the engine starter will be disabled.
SILENT ARMING:
Press the
F
button first, within 3 seconds press button on the transmitter will arm your security
system, No chirp sound will be heard, arm confirmation will be through the vehicles parking lights only.
ARMING WITH NOISELESS MODE:
With the system disarmed, press the button once, the siren will chirp once.
Within 3 seconds, press button again. The siren will emit one short chirp indicating the system is set and will be fully
armed in 5 seconds with the noiseless mode for one arming cycle. In this mode, whenever strong vibration or lesser
vibration is presented to the protected vehicle, the shock sensor cannot trigger the system and just only emit a few warn
away chirps. The only means of triggering is the voltage drop sensor.
ARMING WITH THE TWO STAGE SHOCK SENSOR BYPASSED:
With the system disarmed, press the button once, the siren will chirp once. Within 5 seconds, press button twice
again. The siren will emit two short chirps indicating the system is set and will be fully armed in 5 seconds with the
shock sensor bypassed for one arming cycle. In this mode, the shock sensor cannot trigger the system. The only means
of triggering is the voltage drop sensor.
ARMING WITH VOLTAGE SENSOR BYPASS:
With the system disarmed, press and buttons at the same
time. The siren will emit one short chirp indicating the system is set and will be fully armed in 5 seconds with the
voltage sensor is bypassed. In this mode, the system cannot be triggered by a change in voltage. The only means of
triggering is the shock sensor.
ARMING WITH PATHWAY ILLUMINATION
: Press the button once to arm the system, the siren will chirp
once. Within 3 seconds, press
F
button. The siren will emit one short chirp and the parking light will be turns “ON” for
30 seconds to illuminate your pathway.
G. ACTIVE DISARMING:
1. Press button on the transmitter.
2. The siren will chirp twice and the parking light will flash twice indicating the system is armed. The LED will turn off
and the engine starter disable relay will be enable allow the vehicle to start.
