6
Preparing the Speakers
Dancing Bead Mode
1. Fill the included plastic container with water, and soak up to 30
aquatic beads in the water for approximately 4 hours.
2. Open the top lids of both speakers, and place up to 15 beads
into each container.
3. Pour water into each container. The recommended amount is
approximately 9–10 fluid ounces (280 ml) for the jets to be most
effective, but you can experiment with different amounts.
4. Close the lids, and make sure they are fully pressed down onto
the containers.
Tip:
If the water becomes cloudy or dark, change the water to keep
the aquatic beads clean and fresh.
Dancing Water Mode
1. Open the top lids and pour water into each container. The
recommended amount is approximately 0.7 fluid ounces (20 ml)
for the jets to be most effective operation of the jets, but feel
free to experiment with different amounts.
2. Close the lids, and make sure they are fully pressed down onto
the containers.
Mixed Mode
Each speaker can operate in a different mode. To do this, follow the
setup instructions for the appropriate mode for each speaker.
