Data storage program
Data storage program
For your convenience, C6 has a data storage and load program. It can store five different battery
programs to suit the different specifications for your batteries. You can recall program data when
charging or discharging without setting up the program again. Press the 'START/ENTER' key to
make it blink, then press the '+' or '-' keys to set up the parameter.
Voltage
DEC
DEC
PROGRAM SELECT
SAVE DATA
SAVE [01] NiMH
14.4V 3000mAh
NiMH CHARGE At*
CUR LIMIT 5.0A
NiMH DICHARGE*
1.0A 11.0V
NiMH CYCLE *
DCHG>CHG 3
Data
number
INC
INC
Capacity
DEC
DEC
DEC
-
-
-
INC
INC
INC
+
+
+
Type of
battery
Start
Enter
Start
Enter
Batt type
stop
Save
…
DEC
DEC
-
-
INC
INC
+
+
Start
Enter
Set up the charge/ discharge sequence and cycle number.
Set up the discharge current and final voltage.
Set up the charge current in the manual mode or the current limit in the
auto mode. Press the '+' and '-' keys simultaneously to make the current
field blink to switch the charge mode.
Changing of the parameter in the screen will not affect the charge or
discharge process. This just shows the specifications of the battery. The
screen shows a 12-cell NiMH battery pack with a capacity of 3000mAh.
Saving the data
25
’
>
3 seconds’
’
>
3 seconds’
