Transportation and maintenance
Manual XCAT Basic
Page 29
Edition: 05/2023
4.3
Setting the clamping force on the crossbeam
With the clamping lever open, set a gap of 0 mm to max. 0.5 mm according
to the sketch. The clamping ring must not be clamped in this position. The
red locking sleeve and the blue clamping ring must still be able to rotate
easily.
Info: Regularly grease the friction surface of the clamping levers
with lubricating grease (e.g. Vaseline) to keep them running
smoothly.
Summary of Contents for Basic
Page 2: ......
