Xblue Networks X2020, Installation Manual

Page: 69 / 106

XBLUE Networks
69
Telephone Programming
1.
Ac
cou
nt
5
Admin
1. ȱ Account
There are two levels of programming, “Admin” and “User”, which can be accessed when connecting to the telephone
using an Internet Browser. Use “Admin” - which allows all parameters to be modified, when installing or resetting
network parameters. Use “User” - which is more restrictive, to change individual telephone parameters and call
blocking parameters. Only the “Admin” login has access to these parameters.
1. Admin
1. Name
2. Password
2. User
1. Name
2. Password
2. ȱ Network
1. Network Type
1. Static IP - Enter the Static IP Address that the telephone will use to connect to the Local Area Network (LAN).
2. DHCP - The default, DHCP is used to automatically receive a dynamic IP Address from the DHCP Server on the LAN.
3. Point to Point Protocol over Ethernet (PPPoE) - Although rarely used, this allows the telephone to authenticate directly with the ISP.
2. Static IP
1. IP Address - Enter the Static IP Address that the telephone will use to connect to the Local Area Network (LAN).
2. Subnet Mask - Enter the Subnet Mask for the LAN. Generally, this is 255.255.255.0.
3. Default Gateway - Enter the IP Address of the default gateway. The default gateway refers to the gateway device that connects the
Local Area Network to the Internet. Basically, it is the doorway to the Internet.
4. Domain Name System (DNS) - The telephone will accept up to three DNS servers, which provides redundancy in the event that one
or more stop functioning.
1. Primary DNS
2. Secondary DNS
3. Third DNS
3. PPPoE
1. Name - Enter the name that is required to authenticate on the ISP’s Network. This will be provided by the ISP.
2. Password - Enter the password that is required to authenticate on the ISP’s Network. This will be provided by the ISP.
Notes:
This parameter is rarely used by a telephone endpoint.