Feature Codes:
Call Pickup Intercom
*
+ 3
Call Pickup Phone Line
*
+ 5
Call Transfer
* + * + Ext + # + *
Conference
* + * +2
nd
Call+#+9
Direct VM to Ext
Ext + * + # + 8 + 3
Hold
*
+
*
Intercom Calling
301 – 399
Intercom Force Ring
Ext +
*
Page – All Call
*
+ 2
Page – All Answer Page
*
+ 2
Telephone Line Any
9
Telephone Line Specific
5+L
(Line No. 1-6)
Transfer to Ext. VM # + * + 8 + Ext
Transfer to Operator VM # + * + 8 + 0
Voicemail Codes:
Access Mailbox
*
+ 80+ppp (pswd)
Record Memo
*
+ 81
Play Personal OGM
*
+ 82
Rerecord Personal OGM
*
+ 83
Delete Personal OGM
*
+ 84
Live Conversation Record
#
+ 85
Leave a Message (Intercom) # + 83
Message Usage:
Your New messages will begin playing automatically
Play Previous Message
1
Play/Pause Message
2
Play Next Message
3
Delete Message
4
Hang up to disconnect
Programming Codes:
Programming Extension Numbers ## Ext ##
Ext = 301 – 399
Ringing – Enable/Disable
##+5+L+R+##
L= Line Number (1-6), R=1 for On, 0 for Off)
Call Forward – Enable/Disable (Telephone
Line Calls only. Intercom calls do not forward)
##+801+##+T
T=0=Off, 1=Voicemail, 2= External, 3= Trk2Trk
Call Forward – Wait Time
##+802+##+tt
tt=Time before forwarding 00=immediate,
01-25 seconds.
Call Forward – External Number
##+803+##+Tn+#
Tn=Telephone number, as you would dial it
from this location.
Voicemail – Change Password
##+800+##+ppp
ppp=Three digit password (passcode)
Factory Default – Set it back to Factory Default
##+000+##
Installation:
The Cordless Telephone Module is line
powered, so it does not need a dedicated
power supply.
1.
Plug a line from the X16 server into the port
labeled “EKT”
2.
Plug your cordless, corded or conference
call telephone into the port labeled “SLT1”
3.
The extension number of the first Cordless
Telephone Module will be 320, but can
easily be changed to any unused number
from 301 – 399.
4.
To change the extension number, enter ## +
the extension ##. For example, if
you want to sue extension number 325, you
will enter ##325##.