Xblue Networks X-25, Installation Manual

Page: 99 / 148

99
System
The System Parameters are used to modify parameters that affect all connected telephone Lines and
telephone devices.
Numbering Plan
The Numbering Plan is used to de fi ne the dial plan for the whole telephone system. Although the system
comes up operational with an existing numbering plan, you can customize the numbering plan. If a number is
labeled as “Start”, the dial sequence will be sequential, for example, “Start PSTN Line Number” shows “Start
PSTN Line Number 701”, so the next three dial codes will be 702, 703 and 704.
Extension Numbering
You may select between 2, 3 and 4 digit extension numbering plans. The last number will be the FXS, which is
the port labeled “TEL” on the
X
-25
system and supports a standard cordless telephone. The numbers entered
cannot con fl ict with any other sequence of numbers. For example, you could not set the numbering plan to 400
without changing the All Paging Number fi rst. Also, avoid common 3 digit numbers such as 311, 411, 911, etc.
When you change the extension numbers the system will automatically delete all of the current information.
Two digit Th ree Digits Four Digits
10 101 1001
27 117 1027
“Wireless Local Area Network (WLAN)”