Xblitz Z10 SLIM, User Manual

Page: 10 / 52

10
should be formatted in FAT32 file system first on your computer, then on the
recorder.
6. Audio: The unit is equipped with a condenser microphone that records all
ambient sounds. The sounds may overlap, causing distortion.
04. INSTALLATION
SEE FIGURE F
1. Select and clean a mounting location for the camera.
2. Mount the camera bracket.
3. Insert the memory card into the camera.
4. Place the device in the camera mount.
5. Point the camera lens towards the roadway.
6. Connect the power adapter to the camera.
7. Route the power cable so that it does not obstruct the view while driving (see
picture F).
8. Plug the power adapter into the cigarette lighter socket of the car.
05. OPERATION
1. Activation: The DVR can be activated when placed in the vehicle by pressing the
power button for 1 second. The unit turns off when the power button is pressed
for 2 seconds.
2. Charging: connect via USB or car charger. Connect to the car charger (SEE POINT:
INSTALLATION; 6.,7.,8.) The DVR records automatically when the car starts, turns
off and saves the last file when the car stops.
3. Connecting to an application
4. Specialized software (ROADCAM) is used to control the operation of the device.
The Wi-Fi network name of the device is Xblitz Z10 Slim and the default Wi-Fi
password is 12345678. The software can be downloaded from the Google Store.
All device settings can be accessed from the cam app.
5. Recording
6. Turn on the Wi-Fi of your phone, connect the Wi-Fi of the app. Then the DVR
will enter the default recording mode. In recording mode, the operation indi -
cator shows if the device records. The recording file will be saved to SD/MMC
card. To stop, press the record button or end, when the car stops, the operation
indicator will not flash.
7. Camera mode
8. Turn on the recorder, and also turn on the application to select the camera
mode by going to camera mode. To take a picture, press the “Taking picture”.