Xblitz TANGO 4K, User Manual

Page: 11 / 60

11
6. Audio: The device has a condenser microphone that records all environmen-
tal sounds. Sounds may overlap causing distortion.
04. MONITORING
1. Select and clean the camera mounting location.
2. Mount the camera bracket.
3. Insert the memory card into the slot in the camera.
4. Place the camera in the bracket.
5. Point the camera lens towards the roadway.
6. Connect the power supply to the camera.
7. Route the power supply cable so that it does not obstruct your view while
driving (see Figure B).
8. Plug the power adapter into the car’s cigarette lighter socket.
05. FUNCTIONING OF THE DEVICE
1. Power button:
•
Pressing the button when the video recorder is connected to the app will
start or stop recording.
•
When the video recorder communicates an SD card error, pressing the
button within 5s of the message will format the SD card
•
Pressing and holding the power button will turn the device on or off.
•
Press 5 times in quick succession to reset the unit to factory settings.
2. Charging: connect via USB or car charger. Connect to the car charger (SEE
POINT: INSTALLATION; 6.,7.,8.) The recorder records automatically when you
start the car, turns off and saves the last file when you turn off the car.
3. Connecting to an application: Specialised software (ROADCAM) is used to
control the operation of the device. Connect your phone to the device’s
WiFi network named Xblitz Tango 4K and the default Wi-Fi password is
123456789. The software can be downloaded from the Google Play shop or
App Store. All settings of the device can be accessed from the Roadcam app.
4. Record: Connect the video recorder to the application as described in step
3. The recorder is in record mode by default if a card has been inserted and
formatted. In recording mode, the LED light blinks green. The recording file
will be saved on the SD card. To stop, press the record button.
5. Camera mode: Connect the video recorder to the app as described in step
3. Then in the app, press the camera icon to enter photo taking mode. Then
press the camera button to take a photo.
06. SETTING FUNCTIONS
1. Leave the device on, connect the app to your mobile phone, go to the home
screen, click on the settings icon in the top right corner.