Xblitz S8, User Manual, Page: 23 / 50

23
7. The device doesn't respond .
Press the RESET button or restore factory settings.
8 . There are vertical stripes on the recording .
Wrong screen refresh rate setting. Change the frequency to "50Hz" or "60Hz" ,
depending on the local settings.
Due to constant improvement of our products, the manufacturer reserves the right
to making changes in the device and its set without prior information, some of the
functions described in this manual can slightly di er in reality.
WARNING ! Use only the original charger with 5V power output.
(Do not connect directly to a 220V/230V power socket) .
Not following the instructions can lead to damaging the camera
o r dangerous situations.
WARNING! Playing files on a computer:
The camera does not have a mass memory drive mode. To play the
files on a computer, take the memory card out of the device and use
a memory card reader to connect it to a computer.
EN
WARNING! The camera can heat up when recording, it's normal
and not a fault of the product.