Xblitz S4, User Manual, Page: 20 / 50

20
06. MAIN FEATURES
1. Mobile app
The camera can be operated using a special app that can be downloaded to a device
that uses iOS or Android operating systems.
2. Loop recording
The camera divides the recordings into clips of selected length. You can select the
length of the files in the options. When the memory card is full, the oldest recording
is overwritten.
3 . Resolution
The camera can record in several resolutions. The higher the resolution, the better
the quality of the recordings, but also the bigger the size of the files on the memory
card. It is recommended to use the highest resolution.
4 . G-Sensor
Gravity sensor. The sensor is turned on at the time of collision and the recording from
the event is protected from being overwritten. It is recommended to set it the lowest
available value, as at a higher setting, the camera can capture shocks caused
by uneven roads, which may fill the memory card with files that can't be overwritten.
5 . Motion detection mode
When it is turned on and you leave the camera in standby mode connected to the
power source, the camera will start recording when it detects motion.
6 . Sound recording
The camera can also record audio along with video recording.
07. LED
The camera is equipped with an LED that tells you about the camera's recording
status.
1. LED o – device turned o .
2. The LED is on, red – the device on, the camera is not recording.
3. The led blinks slowly, red – the device records video.
4. The led blinks quickly, red – the device records a video protected from being
overwritten.
5. The led blinks quickly, blue – the memory card is not detected by the device.
Please turn o the camera and place a memory card in it.