Xblitz PARK VIEW, User Manual

Page: 16 / 52

16
BEFORE FIRST USE
1. It is recommended to use high-quality class 10 microSD cards (4 to 32 GB).
2. It is necessary to format the memory card to FAT32 format before inserting
it into the recorder.
3. Do not remove or insert the memory card while the device in powered on,
as this may damage the memory card.
4. The battery allows you to record for no more than 5 minutes without an
external power.
5. When the memory card is full, the oldest unprotected video will be overwritten.
6. It is recommended to use the device's functions in accordance with their
intended purpose. Do not use the motion detection or parking mode while driving
as this may cause automatic turning the device on and o , during a stop
at the intersection.
7. It is recommended to set the G – SENSOR sensitivity level at a minimum,
in order to avoid securing unnecessary recordings and the loss of space on
the memory card. The memory card must be formatted in FAT32 format first
on the PC and then on the recorder.
8. Sound: the device has a capacitive microphone, recording all the sounds from
the environment. The sounds may overlap causing distortion.
CAMERA INSTALLATION
1. Put the camera onto the rear mirror.
2. Mount the camera using rubbers included in the set.
3. Run the power wire and the rear camera wire.
4. Connect the power wire and the rear camera wire.
5. Connect the power adapter to the car cigarette lighter socket.