X8122r User’s Manual
Version 1.0
29 / 70
D. Bridging
Click on the
Bridging
tab to view its sub-menu’s and configure
the bridge settings. The five sub-menu’s are: Bridging, LAN Config,
DSL, ATM VC, and RFC 1483 Interface (EoA). The bridging sub-menu
is described below. (
Each of the other sub-menus is described in the
earlier sections.)
1. Bridging
Click on the Bridging link to view the Bridge configuration. This
table displays the bridge interface name.
Click on the
trash can
icon to delete the current interface, or edit
the current interface by clicking on the
pencil
icon.
In order to use bridging, you must enable
Bridging
and
WAN to
WAN Bridging
. Click on the red bold
Enable/Disable
link to
choose.
If you would like this device to use its own embedded client for
PPPoE and PPPoA, then you must enable ZIPB (Zero Installation
PPP Bridge).
By default ZIPB
is disabled.
Click on the
Submit
button when completed.
