XAVI Technologies Corp. XW501B, User Manual

Page: 16 / 20

16
Encryption Setting – WEP
Press “ WEP Encryption Key Setting ” to enter the “ WEP Key Setting ”
page shown as
- Press the “ Change ” button to modify the contents of “ WEP Key
setting ”, when it is finished, press “ Apply ” to save it. The button “ Change ” and
“ Apply ” is alternately shown on the same position.
- Select which key length 64,128 or 256 bits will be modified or used by “ Key
Length ” item.
- Select which key set will be use by the field of “ Default Key ID ”
Modify the 4 sets key depending on the selected key length on the field of “ Key
Value ”. The key value is used the hexadecimal format.
Encryption Setting – WPA
Press “ WPA Encryption Setting ” to enter the “ WPA Setting ” page
shown as Figure
- Press the “
Change ” button to modify the contents of “ WPA Setting ”,
when it is finished, press “ Apply ” to save it. The button “ Change ” and “ Apply ” is
alternately shown on the same position.
- Select
TLS or PEAP protocol and add user name / password on the field of
“ Connect information ”
- Add passphrase and select the key format on the field of “ Pre-shared
Key ”
- Select the Certificate you want by the “ Certificate ” drop down menu
“ Profile ” group:
- Select the profile that has been saved previously from the “ Profile name ”
drop down menu, then press “ Load ” button to load the status to use.
- Write the profile name on the field of “ Profile name ”, and press the “ Save
Current ” button to save the current status on the profile.