X8124r User’s Manual
Version: 1.0
- 36 -
The following is a list of field names and their descriptions. After
filling in the table click on the
Submit
button
Field Name
Description
Rule ID
Enter a Rule ID.
Direction
Select an
incoming
or
outgoing
direction.
In Interface
Select an incoming interface from the
drop down list.
Security Level
Select a security level:
high
,
medium
, or
low.
Log Tag
Enter a name for the log.
Start Time
Enter a start time for the IP filter.
Action Select
accept
or
deny
incoming IPs.
Interface
Select an outgoing interface from the
drop down list.
Log Option
Select to
enable
or
disable
logging.
Blacklist status
Select to
enable
or
disable
the blacklist.
End time
Select an end time for the IP filter.
Src IP Address
Enter the source IP address range.
Dest IP Address
Enter the destination IP address range.
Protocol
Select a protocol from the drop down
list.
Apply Stateful Inspection
Check this box if you would like to
enable
Stateful
Inspection. If you decide
to use Stateful Inspection, you must
supply the source/destination port, TCP
flag, ICMP type, and ICMP code.
IP Frag Pkt
Select
Yes
,
No
, or
Ignore
packet
fragmenting.
Packet Size
Enter the packer size into the text box,
or select
any
from the drop down list.
TOD Rule Status
Select to
enable
or
disable
time-out
detection.
