background image

9

DC  Power  Panel

As shown in Figure 5 below, the DC Power Panel contains the DC
Power Socket, which provides 12 volts for operating automotive and
marine type products. The DC Power Socket also serves as the input
for recharging with either the AC Charger or DC Charging Cable. See
Section 7 for details.

IMPORTANT: The vents below the DC Power Socket should never
be covered or blocked when xPower1500 is used.  These vents are
essential for maintaining optimal performance.

Figure 5 - DC Power Panel

20

Disconnect the DC Charging Cable at both ends once xPower1500 is
fully charged or when your vehicle’s motor is not running.  Do not
leave xPower1500 permanently connected to the vehicle’s lighter
socket or 12-volt accessory outlet.

CAUTION:

  While  xPower1500  is  being  recharged  with  the  DC

Charging  Cable  from  your  vehicle,  do  not  operate  AC  products
over  120  watts  from  its  AC  outlets.

Recharging  with  a  Generator’s  12-Volt  DC
Power  Outlet

Recharging xPower1500 from a generator using the AC Charger is
possible, but could require extended generator running time before
xPower1500 is fully charged. Since many generators have an auxiliary
regulated 12-volt DC output designed for charging 12-volt batteries,
using this power source will result in a shorter recharge time.  If the
generator has a cigarette lighter style socket for its 12-volt output,
follow the connection instructions above - Recharging From Your
Vehicle
.

Most of xPower1500’s capacity will be restored in about 6 to 8 hours
when using a generator’s regulated 12-volt DC output.  Level of
charge can be verified by checking the Battery Level Indicator 15
minutes after disconnecting the charging source.

CAUTION:

  The  generator  output  must  be  intended  for  battery

charging.    An  unregulated  output  or  one  that  exceeds  15  volts
DC  can  damage  the  battery  pack.

Recharging  with  a  Solar  Panel

A 12-volt solar panel rated to produce a maximum of 12 amps can be
used to charge xPower1500 via the DC Power Socket.  Once the solar
panel’s DC plug is inserted into the DC Power Socket and the solar
panel is placed in the sun, xPower1500 will charge automatically just
as with the AC Charger.  With direct sunlight, a typical 3 Amp solar
panel will charge xPower1500 in about 24 hours.  If the solar panel
does not have a regulated output, disconnect it immediately after
xPower1500 is charged.

CAUTION:

    A  solar  panel  with  an  unregulated  output  left

connected  after  charging  is  complete,  or  one  with  an  output  that
exceeds  15  volts  DC,  can  damage  the  battery  pack.

ARTWORK FILM No. 445-0127-98-01 REV. 1  MAY 10/2001

Summary of Contents for xPower1500



















Reviews: