manualshive.com logo in svg

Xantrex XPower 600, Owner'S Manual

Share
Download
Xantrex XPower 600 Owner'S Manual Download Page 3

Contents

1.0  Introduction ........................................................................ 1
2.0  Safety First … Before You Use xPower 600 ...................... 2
3.0  Quick Start Guide .............................................................. 3

3.1  Overview .................................................................................................. 3
3.2  An Explanation of Power Ratings and Battery Life ...................................... 4
3.3  Operating 115 Volt AC Products ................................................................ 4
3.4  Operating 12 Volt DC Accessories ............................................................. 4
3.5  Recharging xPower 600 ............................................................................ 5
3.6  Using xPower 600 to Jump-Start Your Vehicle ........................................... 5

4.0  Indicators, Controls and Connection Points .................... 6

4.1  AC Power Panel ........................................................................................ 6

4.1.1  Battery Status Switch / Battery Level Indicator ............................... 6
4.1.2  AC Outlets Switch / POWER Light / AC Outlets ............................... 7
4.1.3  FAULT Light ................................................................................... 7

4.2  DC Power Panel ....................................................................................... 8
4.3  High Power 12 Volt DC Terminals .............................................................. 9

5.0  Powering 115 Volt AC Products ...................................... 10

5.1  General Information .................................................................................10
5.2  Connecting Your AC Products ..................................................................10
5.3  Automatic Protection: Overload, Overheating and Low Battery ..................11
5.4  Interference with Electronic Equipment.....................................................12

5.4.1  Buzzing Sound in Audio Systems..................................................12
5.4.2  Television Interference ..................................................................12

5.5  Battery Operating Times ..........................................................................13

6.0  Powering 12 Volt DC Accessories ................................... 14

6.1  Connecting 12 Volt DC Accessories .........................................................14
6.3  Battery Operating Times ..........................................................................15

7.0  Vehicle or Boat Engine Starting Assistance .................. 16

7.1  Jump-Starting Direct to the Battery ..........................................................16
7.2  Jump-Starting via a Vehicle’s Lighter Plug Socket ....................................17

xPower600 is a trademark of Xantrex International. Xantrex is a registered trademark of Xantrex Technology Inc.

Copyright © 2000 Xantrex International. All rights reserved.

Get user manuals: 

See SafeManuals.com

 

 

Summary of Contents for XPower 600





































Reviews:

No comments

Brands by name

Popular brands

Load more brands