13
4. Tighten the nut on each cabling terminal until it is snug. Do not
over-tighten.
5. Place the inverter’s lighter plug in the vehicle’s lighter socket or a
12 V outlet.
6. Turn on the unit by holding the switch located on top of the unit
until 888 is shown on the display.
The digital display will show the battery voltage, indicating that the
inverter is operating normally and AC power is available at the
outlet.
7. Plug in the AC product you want to operate.
8. When not in use, always turn the inverter off by holding the switch
until the digital display turns off.
Connecting for loads over 150 W
To operate loads greater than 150 W continuously, you must connect the
unit directly to a 12 V battery using the DC cable clamps. When the
inverter is connected this way, you can operate loads of up to 400 W.
WARNING: Shock hazard
Batteries contain corrosive materials and present an electrical shock
hazard. To prevent irritation and burns, wear protective eyewear and
clothing when you install the inverter or work with the batteries. Take
special care to ensure that metal tools and personal metal objects like
rings and bracelets do not contact the battery terminals.
