background image

28

shipment to the customer, whichever is greater. All replaced 
products and all parts removed from repaired products 
become the property of Xantrex.
Xantrex covers both parts and labor necessary to repair the 
product, and return shipment to the customer via a Xantrex-
selected non-expedited surface freight within the contiguous 
United States and Canada. Alaska and Hawaii are excluded.  
Contact Xantrex Customer Service for details on freight 
policy for return shipments outside of the contiguous United 
States and Canada.

How do you get service?

If your product requires 

troubleshooting or warranty service, contact your merchant. 
If you are unable to contact your merchant, or the merchant 
is unable to provide service, contact Xantrex directly at:

Direct returns may be performed according to the Xantrex 
Return Material Authorization Policy described in your 
product manual. For some products, Xantrex maintains a 

Telephone: 1 800 394 0440 (toll free North America)

1 360 925 5097 (direct)

Fax:

1 800 994 7828 (toll free North America)
1 360 925 5143 (direct)

Email:

[email protected]

Summary of Contents for XPower 175 PLUS










































Reviews: